Dash Cam Hardwire Kit, Mini USB Hard Wire Kit Fuse for Dashcam, Plozoe 12V-24V to 5V Car Dash Camera Charger Power Cord, Gift 4 Fuse Tap Cable and Installation Tool（11.5ft

Price: $17.90
(as of Nov 07, 2023 19:48:36 UTC – Details)

Product Description

Upgraded the 2nd Generation Dash Cam Hardwire Kit

This mini usb cable and Micro USB port converter hardwire kit. Perfect for 24/7 Parking Surveillance.Low voltage protection protects against battery dying.Plozoe Dash cam hardwire kit works for almost all car mini & micro USB device, such as dash cam、mirror cam、GPS navigator and radar detector etc.

Installation in minutes with little to no expertise required.11.5ft/3.5meter power cable included.

Notice：

Our Dash Cam Hardwire Kit is Mini USB interface

Need Micro USB, please search ASIN: B07X7MY854.

Need Type C USB, please search ASIN: B0B19LGTF9.

Dash Cam Hardwire Kit suitable for REDTIGER F7N, please search ASIN: B0B19LGTF9.

Dash Cam Hardwire Kit suitable for Vantrue N4, please search ASIN: B0B19LGTF9.

Mini USB to USB C Multipurpose Cable

If your dash cam is a USB C plug, please tell us and send it to our email

Our factory also has mini USB female to type C USB male cable, which can solve the problem of mismatched model connectors for you.

Safety Notes

Pertorm the installation with the ignition in the OFF position.

Do not strip any live wires

Correct electnical polarity and grounding is required for safe and proper installation.

Only connect to a negative ground DC supply circuit.

Not for installation to positive ground circuits.

If you don’t have experience on installing the hardwire kits for the dash cam, please ask professional for help.

Technical Details Connector: Mini USB Connector Input Voltage: DC 12V-24V Output Voltage: 5V Output Current: 2A Working Temperature:-40~ 160 Degree F Cable Length: 11.5ft/3.5m Low Voltage Protection: 11.6V for 12V vehicle; 23.5V for 24V vehicle.

The main function

Low Voltage Protection

Set 6 high-precision resistors,Dual power-off protection chip, intelligent low-voltage protection device can read the battery voltage more accurately, When your car’s voltage is lower than 11.7V or 11.6V, it will automatically turn off the power. Protect your car battery more effectively.

24 Hours Parking Surveillance

The vehicle hard-wire kit connected to car battery or fuse box power, can uninterruptedly supply power for dash camera for 24 hours. It can even supply power when the car is turned off.

Fuse Puller

One free fuse puller inside the storage box for easy picking.

High Quality Copper Conductor

3.5mm transmission line, high-quality copper core conductor, the dashcam hardware kit is faster and safer to charge

Scope of application

Four Types of Fuses Adapters for Almost All Cars

Comes with Low-profile mini fuse, Mini fuse, Micro 2 fuse, ATO (regular) fuse adapters for you to use whatever your vehicles fuse box requires.

Besides, with the seal wire connectors that will be easy for you to connect, firm connection and prevent short circuit.

Upgraded the 2nd Generation Dash Cam Hardwire Kit

An automatic matching device is set at the mini connector to make the compatibility range wider, such as Apeman Aukey Rexing Vantrue Vava Garmin Dash cam, etc.

Compatible 12 – 24V Vehicles

This hardwire kit accepts voltage from any type of vehicles runs on 12 – 24V, works perfect for car, truck, bus, suvs, or big rig for continuous power.

Compatible With Most Of The Car Dash Cam With Mini USB Input

This mirror dash cam hardwire kit is applied to almost all car Mini USB device (Voltage Between 12-30V), Convert the voltage from 12v to 5v,such as Vantrue dash cam、mirror cam、GPS navigator and radar detector etc, it match most of the car installation.

Installation steps

Find the Correct Fuse Slot

Open the fuse box, find the correct fuse slot for your hardwire kit. If you need to find an ignition switched fuse, put the key in the vehicle, find the fuse which is not lit up while the car is off, and test it by turning the car on to see if it lights up. If your kit requires constant power, turn off the car and remove the key to see which fuse slots stays lit on.

Connect the Red Wire

Once you’ve determined which fuse slots you need to use for your hardwiring kit you can crimp the red wire of your hardwire kit onto the Add-A-Fuse. Gently remove the fuse you identified. Install the fuse you just removed into the installation kit add-a-fuse circuit. Plug the add-a-circuit into the fuse box in the correct orientation.

Ground the Hardwiring Kit

Slip the black wire (which is in the shape of a C) under a metal bolt or screw in your vehicle (this is the ground wire). Check that it is not attached onto plastic parts. You will typically need a socket wrench to loosen the nut or bolt that you choose to ground with. To attach the grounding terminal, loosen the nut or bolt enough to slip it in and tighten it back up afterwards.

DUAL SLOT FUSE HOLDER

It provides one fuse holder to protect original circuit and provides a lead with the second fuse holder for new circuit.

Input:
9V-24V 9V-24V 9V-24V 11.4V-30V 11.4V-30V

Output:
5V / 2A 5V / 2A 5V / 2A 5V / 3A 5V / 3A

Length
11.5ft 11.5ft 11.5ft 11.5ft 11.5ft

Connector Port
Mini USB Port Micro USB Port USB C Port Mini USB Port Type C USB Port

Low Voltage Protection
√ √ √ √ √

24 H Parking Mode
√ √ √ √ √

ACC parking Mode
√ √ √ √ √

Microwave Radar Sensing
X X X √ √ √ √

Upgraded the 2nd Generation Dash Cam Hardwire Kit-You will get 1 x Mini USB hardwire kit,1 x installing crowbar,4 x fuse tap cable,dash cam hardwire with the most popular fuse types will meet the applications for most car models
24 Hours Surveillance -The vehicle hard-wire kit connected to car battery or fuse box power, can uninterruptedly supply power for dash camera for 24 hours. It can even supply power when the car is turned off.If the voltage of your car battery drops to 11.6V or 23.5V, the regulator will cut off the power,which leaves you with enough power to start your car
High Secure Standards-The mini USB hardwire kit with built-in precise switching power supply module can transform 12V(24V) to 5V. The built-in safeguards protect your devices against excessive current, overheating
Wide Compatibility-This mini usb cable hardwire kit is suitable for most car models(Voltage between 12-24V). Our usb hardwire kit works for almost all car mini USB device, such as dash cam、mirror cam、GPS navigator and radar detector etc
Easy Installation-Simple hidden wiring keeps the car neat and tidy and releases the cigarette lighter for connecting to more devices. TIPS: Please read the quick guide carefully before use