Itokii UNO R3 The Best Starter Kit for IoT & Robotics with UNO R3 Board and More Components, Tutorials Compatible with Arduino IDE. IoT Kit Electronic kit iot Development kit Smart Home kit

Price: $22.21
(as of Dec 01, 2023 02:26:31 UTC – Details)

Product Description

Some tutorials included. From Basic to advance projects.

Lesson 6 – Buzzer Tutorial

Overview

In this lesson, you will learn how to generate a sound with an active buzzer.

Lesson 9 – Servo Tutorial

Overview

Servo is a type of geared motor that can only rotate 180 degrees. It is controlled by

sending electrical pulses from your UNO R3 board. These pulses tell the servo what

position it should move to. The Servo has three wires, of which the brown one is the

ground wire and should be connected to the GND port of UNO, the red one is the

power wire and should be connected to the 5v port, and the orange one is the signal

wire and should be connected to the Dig #9port.

Lesson 14 – Remote Control Tutorial

Overview

Using an IR Remote is a great way to have wireless control of your project.

Infrared remotes are simple and easy to use. In this tutorial we will be connecting

the IR receiver to the UNO, and then use a Library that was designed for this

particular sensor.

In our sketch we will have all the IR Hexadecimal codes that are available on this

remote, we will also detect if the code was recognized and also if we are holding

down a key.

Lesson 18 – Water Level Tutorial

Overview

In this lesson, you will learn how to use a water level detection sensor module.

This module can perceive the depth of water and the core component is an

amplifying circuit which is made up of a transistor and several pectinate PCB

routings. When put into the water, these routings will present a resistor that can

change along with the change of the water’s depth. Then, the signal of water’s depth

is converted into the electrical signal, and we can know the change of water’s depth

through the ADC function of UNO R3.

All you need to build your projects.

From Basics to Advance projects.

Arduino IDE compatible
More than 30 Tutorials included with rich images and Diagrams
External Power supply not included
More than 36 components
for creators ages 7 and up
Starter Kit